Έμβλημα Πολυτεχνείου Κρήτης
Το Πολυτεχνείο Κρήτης στο Facebook  Το Πολυτεχνείο Κρήτης στο Instagram  Το Πολυτεχνείο Κρήτης στο Twitter  Το Πολυτεχνείο Κρήτης στο YouTube   Το Πολυτεχνείο Κρήτης στο Linkedin

Νέα / Ανακοινώσεις / Συζητήσεις

Τα μηνύματά μου    Αναζήτηση

  • Όλες οι κατηγορίες
  • Δημόσιες Ανακοινώσεις
  • Δημόσιες Παρουσιάσεις Φοιτητών
  • Παρουσίαση μεταπτυχιακής εργασίας κ. Γεωργίου Μιχάηλ, Σχολή ΜΠΔ

Παρουσίαση μεταπτυχιακής εργασίας κ. Γεωργίου Μιχάηλ, Σχολή ΜΠΔ

  • Συντάχθηκε 26-07-2022 11:27 Πληροφορίες σύνταξης

    Ενημερώθηκε: -

    Τόπος:
    Σύνδεσμος τηλεδιάσκεψης
    Έναρξη: 29/07/2022 18:00
    Λήξη: 29/07/2022 19:00

    ΠΟΛΥΤΕΧΝΕΙΟ ΚΡΗΤΗΣ

    ΣΧΟΛΗ ΜΗΧΑΝΙΚΩΝ ΠΑΡΑΓΩΓΗΣ ΚΑΙ ΔΙΟΙΚΗΣΗΣ

     

    Ονοματεπώνυμο: ΓΕΩΡΓΙΟΥ ΜΙΧΑΗΛ 

    Αριθμός Μητρώου: 2018019028 

     

    Θέμα 

    Τίτλος στα Ελληνικά: "Ανάπτυξη μεθοδολογίας για ανάλυση αντοχής σε ανεμογεννήτρια εφοδιασμένη με διαχύτη (DAWT)" 

    Τίτλος στα Αγγλικά: "Methodology development for strength analysis of a Diffuser Augmented Wind Turbine (DAWT)". 

     

    Εξεταστική Επιτροπή: 

    Επιβλέπων: Ι. Νικολός, Καθηγητής 

    Πρώτο Μέλος: Α. Δελής, Αν. Καθηγητής 

    Δεύτερο Μέλος: Γ. Αραμπατζής, Επ. Καθηγητής 

     

    Περίληψη 

    Περίληψη της εργασίας στα Αγγλικά: In the present work, we have studied the structural stability of the inner column of a Diffuser Augmented Wind Turbine (DAWT). The study model is an existing, under-development wind turbine. 

    Diffuser Augmented Wind Turbines function extremely well in terms of performance. The volume of the diffuser causes the ambient air to redirect and accelerate as it passes through the tunnel in the center of the diffuser. This additional flow and acceleration provide a higher energy output. Increasing to larger diameters this advantage reversing and turning it into a greater stumbling block. The wind resistance that augments the energy output is carried through the structure to the ground. This also increases the forces that the structure must withstand to tremendous levels. Unfortunately, this stumbling block limits the size of DAWTs; therefore they cannot directly compete with Horizontal Axis Wind Turbines (HAWT), whose development has taken them to unfathomable heights. 

    This does not mean that there is no reason for further research and development of DAWTs, which, as we have already mentioned, have significantly higher performance at similar blade diameters compared to HAWTs. DAWTs may be an alternative in many specific locations and may be a solution that is worth investigating in the fight against climate change. 

    As our study shows, the DAWT’s structure is subjected to very strong frontal forces, due to the drag of the diffuser. For this reason, we intend to investigate the strength of the metal column holding the diffuser, using finite element analysis (FEA). We have attempted to strengthen the critical points while keeping the overall size narrow. We are trying to find a technically and economically feasible solution to the problem and have tried to optimize the project to some extent. The whole process is illustrated in the following diagram. This cycle was performed a number of times, while in this study we present only the final iteration and the corresponding results. 

     

    Ημερομηνία Εξέτασης 

    Ημέρα/Μήνας/Έτος: Παρασκευή, 29/7/2022 

    Ώρα: 18.00 

     

    Χώρος Εξέτασης 

    Αίθουσα: Διαδικτυακά 

    Κτίριο: ……………………………………… 

    Join Zoom Meeting 

    https://tuc-gr.zoom.us/j/92153636299?pwd=bGdFdnNKZ1ZpWjUyTmY0U0pDUUk4Zz09 

    Meeting ID: 921 5363 6299 

    Password: 367603 



© Πολυτεχνείο Κρήτης 2012